Primary Functions in Ground Improvement

 

Reinforcement: Adding tensile strength to soil (which is great at compression but terrible at tension).

Separation: Preventing soft subgrade soils from mixing with high-quality aggregate layers.

Filtration/Drainage: Allowing water to pass through while keeping soil particles in place, preventing "piping" or erosion.

Containment: Locking soil in place to prevent lateral spreading.

 

Send Inquiry Now

 
Geosynthetic For Ground Improvement

Ground Improvement Typical Techniques

Weiwo provides advanced ground improvement solutions, including Jet Grouting for in-situ soil stabilization, Soil Nailing for slope and retaining support, Rammed Aggregate Piers for soil densification, ISO/CE-certified geosynthetics for reinforcement and drainage, Concrete Canvas for erosion, waterproofing, and bund protection, and Prefabricated Vertical Drains to accelerate consolidation and enhance structural stability. 

Geosynthetic For Ground Improvement
Geosynthetic For Ground Improvement

 

 Key Types of Geosynthetics

 

Type Primary Use Case How it Works
Geogrids Pavements, retaining walls, steep slopes. High-stiffness mesh that "interlocks" with aggregate to create a rigid platform.
Geotextiles Roads, drainage layers, embankments. Woven or non-woven fabrics used for separation and filtration.
Geocells Erosion control, heavy load support. A 3D honeycomb structure that confines soil/gravel, preventing it from moving under weight.
Geocomposites Retaining walls, landfills. A hybrid (e.g., a core for drainage with a fabric for filtration) to handle complex water issues.
PVDs Soft clay consolidation. "Wick drains" that speed up the removal of water from saturated soils to prevent long-term settling.

 

Common Applications

 

Flexible Pavement Stabilization

By placing a geogrid or high-strength geotextile at the interface of the subgrade and the base course, you can significantly reduce the required thickness of your gravel. It distributes the wheel load over a wider area, which prevents rutting.

Soft Soil Consolidation

If you're building on "muck" or soft clay, building a heavy structure will cause years of sinking. By installing Prefabricated Vertical Drains (PVDs) and applying a temporary soil "surcharge," you can squeeze the water out and achieve 90% of the settlement in months rather than decades.

Reinforced Soil Slopes (RSS)

Instead of building expensive concrete gravity walls, you can use layers of primary geogrid to "wrap" the soil. This allows you to build much steeper slopes (up to 70–90 degrees) that are naturally vegetated and earthquake-resistant.

 

Engineering Considerations

 

Selection isn't just about strength; you have to look at:

Aperture Size: For geogrids, the holes must be sized correctly for the specific rock/gravel being used.

Creep: How much the material will stretch over 50–75 years under constant load.

Environmental Degradation: Resistance to UV light during installation and soil pH levels once buried.

Pro-tip: For ground improvement, the "Interaction Coefficient" is everything. It's a measure of how well the soil "grips" the geosynthetic. If they don't bond well, the material is just a slippery sheet in the dirt.

Send Inquiry