At Hangzhou Weiwo Geosynthetic Materials Co., Ltd, quality inspection is not a final step - it is a system that runs through the entire production process. Our in-house laboratory is equipped with specialized instruments to evaluate the physical, mechanical, and hydraulic properties of every geosynthetic product we manufacture, including geogrids, geotextiles, geomembranes, geocells, geocomposites and dewatering bags. With 100% batch inspection, ISO 9001 certified quality management, and testing performed to ISO, ASTM, CE and SGS standards, we ensure that every roll shipped to our customers meets the specified requirements and carries reliable technical data for international engineering projects.

100%
Batch Inspection
30+
Test Instruments
6
Testing Categories
ISO, CE, SGS
Standards Applied
Testing Footage

Below is part of the testing equipment in our laboratory. These instruments are used daily by our trained QC technicians, and every test follows a written procedure with results recorded and traceable by batch number.

Geotextile GSM Testing

Geotextile Thickness Testing

Geotextile Water Permeability Testing

Geotextile Laboratory Testing

Nonwoven Geotextile Tensile Strength Testing

Geotextile Apparent Opening Size Testing

Nonwoven Geotextile Tensile Strength Testing

Electronic Geotextile Comprehensive Testing

Our Testing Capabilities

We use specialized testing equipment to evaluate the physical, mechanical, and hydraulic properties of our geosynthetic products. Our testing facilities include Universal Tensile Testing Machines for tensile strength and elongation, Thickness Gauges for material thickness, CBR Puncture Testers for puncture resistance, Trapezoidal Tear Testing Machines for tear strength, and Water Permeability Testing Equipment for geotextile filtration performance. For HDPE geomembranes, we use Carbon Black Content Testers, Density Testing Equipment, and Oxidative Induction Time (OIT) Testing Equipment to assess material composition and durability. Geogrid testing includes tensile strength and junction strength evaluation, while dewatering bags are inspected for seam strength, fabric properties, and structural integrity.

01. Tensile Strength & Elongation

Universal tensile testing machines measure tensile strength, elongation, and junction strength of geogrids and geotextiles.

ISO 10319 · ASTM D6637 · GB/T 17689
02. CBR Puncture & Tear Resistance
CBR Puncture Testers and Trapezoidal Tear Testing Machines evaluate resistance to installation damage on site.
ISO 12236 · ASTM D6241 · ASTM D4533
03. Thickness & Mass Per Unit Area
Digital thickness gauges and electronic balances verify thickness under specified pressure and GSM of every batch.
ISO 9863 · ISO 9864 · ASTM D5199
04. Hydraulic Properties
Water permeability equipment verifies filtration performance, permittivity and flow rate of nonwoven geotextiles.
ISO 11058 · ASTM D4491 · GB/T 15789
05. Geomembrane Durability
Carbon black content, density and Oxidative Induction Time (OIT) testing confirm HDPE composition and ageing resistance.
ASTM D1603 · ASTM D1505 · ASTM D3895
06. Seam & Structural Integrity
Dewatering bags and geotubes are inspected for seam strength, fabric properties and structural integrity.
ISO 13935 · ASTM D4884 · Internal Spec
Inspection Workflow

Each gate in the workflow has a written acceptance criterion. A batch that fails one gate does not move to the next, and no roll is packed until its mechanical and hydraulic indexes meet the specified standard.

STEP 01
Raw Material Control
Resin, yarn and roving verified for grade, density and moisture before release to production.
STEP 02
Online Control
Thickness, width, mesh size and mass monitored continuously during extrusion and stretching.
STEP 03
Lab Sampling
Samples pulled per batch and tested for tensile, puncture, tear and hydraulic performance.
STEP 04
Data Review
Results compared to the specification sheet and the referenced international standard.
STEP 05
Release & Trace
Batch released with test record filed; certificates issued with shipping documents.
Standards & Certification

Whether your engineer references ISO, ASTM, EN or GB, test procedures are selected to match - and the report states which standard was applied, so the data can be checked independently. Third-party witness testing (SGS, TÜV, BV) and factory test certificates can be issued for any shipment.

ISO 9001
Quality System
CE
EU Conformity
SGS
Third-Party Test
ASTM
US Standard
GRI
Geosynthetic Institute
GB/T
China Standard
TEST REPORT & QUOTATION

Need the Test Report for Your Project?

Send us your specification and standard reference. Our QC team will confirm the test method and provide the data sheet before you order.

REQUEST A TEST REPORT  →
Have Technical Drawings?
Send your drawings, BOQ or technical specifications for engineering review.
Third-Party Witness Testing
SGS, TÜV or BV witness testing can be arranged at our factory before shipment.
Send Inquiry