What is the water permeability of biaxial geogrid?

Nov 06, 2026

Leave a message

Jack Martin
Jack Martin
Jack is a marketing professional at the company. He is responsible for promoting the company's geosynthetic products in the international market. His marketing strategies help increase the company's brand awareness and market share.

If you’ve ever worked on a road project, a site for a building, or even a drainage setup, you’ve probably heard of biaxial geogrids—those grid-like synthetic materials that make soil and rock way more stable. But one question I get ALL the time from contractors, engineers, and even DIYers tackling bigger jobs is this: “What’s the water permeability of this stuff, anyway?” I’m the owner of a geogrid supply company, so I field this question weekly, and it makes total sense: permeability isn’t just a technical detail—it’s what determines if a product works for draining water away from a structure, preventing muddy washouts, or keeping a road base from turning into a soggy mess.

Let’s cut through the jargon first. Water permeability here basically means how easily water flows through the biaxial geogrid’s openings, not through the material itself (geogrids are usually made of polyethylene or polypropylene, so they’re not porous on their own). Their whole design—those intersecting ribs that form uniform square or rectangular openings, called apertures— is what controls that flow. I’ve tested hundreds of samples from my inventory, from our High-Tensile Steel Plastic Geogrid 30-120kN for heavy-duty road bases to our lighter Bidirectional Geogrid for residential landscaping. The permeability number isn’t a one-size-fits-all value, though—it depends on a handful of key factors.

First, aperture size is the big one. The openings on biaxial geogrids aren’t random; they’re engineered to fit specific soil particles. For example, a geogrid with 20mm x 20mm apertures (common for ground stabilization) has way bigger gaps than one with 10mm x 10mm openings, so water moves through it much faster. I remember a call last year from a local contractor who tried to use our smaller-aperture geogrid for a French drain project—he complained the water wasn’t draining, until we figured out he mixed up his specs. That’s why matching aperture size to your project’s needs is non-negotiable. Then there’s rib thickness and overall grid thickness: thicker ribs mean slightly smaller net flow space, but that’s a trade-off for tensile strength, which is why our Steel Plastic Geogrid (rated 30 to 120 kN/m) is super durable but has a tiny bit less permeability than our lighter-duty residential models.

So what’s the actual number we’re talking about here? Permeability is usually measured in coefficient of permeability (k-value), units like cm/sec or m/sec. From independent lab tests on our products, typical biaxial geogrids have k-values between 10⁻² and 10⁻¹ cm/sec. That might sound abstract, but for context: standard gravel has a k-value around 10⁻¹ to 1 cm/sec, and silty soil is around 10⁻⁵ cm/sec. Our tests show that even our lowest-permeability geogrids are way more permeable than fine silt, which means they won’t clog up with small soil particles easily. I should note that these numbers are for clean geogrids, though—if they get buried under really fine soil without a separation layer (like a non-woven geotextile), sediment can stick in the apertures and slow flow down. That’s why good installation matters as much as the product itself.

Another myth I hear all the time: people think biaxial geogrids block water entirely, or they let too much water through and cause erosion. Neither is true—their permeability is engineered to be in that sweet spot where they let water flow freely (preventing hydrostatic pressure buildup, which can crack roads or shift foundation walls) while their tensile strength holds soil in place. For example, when we sell our Biaxial Geogrid For Road Base Reinforcement, engineers rely on this exact balance: the grid keeps the road’s aggregate layer from shifting, and the permeability prevents water from pooling under the asphalt, which is the #1 cause of potholes and early road failure. I’ve seen this play out on a highway project 2 years ago—they used our 80kN/m biaxial geogrid for the base, and even after a heavy rainstorm that shut down 3 local roads (without geogrid), that section stayed intact.

Bidirectional GeogridSteel Plastic Geogrid

What about the heavy-duty stuff, like our BX Geogrids For Ground Stabilisation designed for large construction sites or embankments? Their permeability is slightly on the lower end of that 10⁻² to 10⁻¹ cm/sec range, but that’s because their thicker, heavier ribs form slightly smaller apertures to handle extreme loads (like holding back slope soil or supporting heavy construction equipment). Even so, I still recommend pairing them with a thin geotextile layer if the site has lots of fine sand or silt—prevents clogging without cutting down on drainage.

Now, let’s talk about what this means for your project, because the lab numbers don’t mean a thing if they don’t fit your needs. If you’re a homeowner doing a patio or walkway base, you don’t need a 120kN/m geogrid, and permeability isn’t going to be a top concern—our lighter bidirectional geogrid will let water drain through just fine. If you’re a civil engineer working on a highway, embankment, or stormwater management system, permeability is make-or-break: too low, and water builds up under the structure; too high, and the soil particles wash away, leading to slope failure.

I always tell folks to ask for permeability data from their geogrid supplier, not just tensile strength numbers. A product with high tensile strength but super low permeability isn’t going to work for drainage-heavy projects. At my company, we include full lab test reports for every single geogrid we sell, including k-values, aperture sizes, and even clog resistance ratings (which tell you how well the grid holds up over time under sediment).

If you’re still unsure which geogrid is right for your project, whether it’s a road base, ground stabilization, or something else, don’t hesitate to reach out. We work with contractors, engineers, and even small businesses to match them with the right product that balances strength, permeability, and budget. We don’t sell one-size-fits-all geogrids—we make sure your choice works for your specific site conditions, including drainage needs.


References

  1. Christopher, B. R., & Holtz, R. D. (1985). Geotextile Engineering Manual. Federal Highway Administration.
  2. Berg, R. R., & Huen, W. J. (2000). Geogrid Reinforcement for Soil Structures. John Wiley & Sons.
  3. Koerner, R. M. (2012). Designing with Geosynthetics (6th ed.). Pearson Education.
Send Inquiry
Send Inquiry